Intermec CK31 User Manual download pdf (Page 84)

Chapter 2 — Configuring the CK31

CK31 Handheld Computer User’s Manual 67

d Enter a User Name and Password and enable the Save

Password check box.

e (Optional) In the Domain field, enter the Active Directory

domain associated with the user account.

f Press Enter.

7 Exit Intermec Settings.

To enable WPA-PSK With Microsoft Security

1 Make sure you have configured the communications and

radio parameters on your CK31.

2 Open Intermec Settings.

3 Choose Communications > 802.11 Radio > Microsoft

Security.

4 For Infrastructure Mode, choose Infrastructure.

5 For Network Authentication, choose WPA-PSK. Data

Encryption automatically defaults to TKIP.

6 For Pre-Shared Key, enter the pre-shared key or the

passphrase.

The pre-shared key must be a value of 32 hex pairs preceded

by 0x for a total of 66 characters. The value must match the

key value on the authenticator. The passphrase must be from

8 to 63 characters. After you enter a passphrase, the CK31

internally converts it to a pre-shared key.

This value must match the passphrase on the authenticator.

7 Exit Intermec Settings.

Using 802.1x Security

802.1x security provides centralized user authentication using an

authentication server, authenticators (access points), and

supplicants. These components communicate using an EAP

authentication type, such as TLS (Transport Layer Security) or

PEAP (Protected Extensible Authentication Protocol). 802.1x

security provides data encryption using dynamic WEP key

management.

To use 802.1x security, you need:

1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 207 208

No comments

Intermec CK31 User Manual Page 84