Intermec CN3e User Manual Page 51

  • Download
  • Add to my manuals
  • Print
  • Page
    / 142
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 50
Chapter 2 — Connecting and Configuring the CN3
CN3 Series Mobile Computer User’s Manual for Windows Mobile 5.0 39
The Bluetooth radio maintains its state through a warm or cold boot
and maintains virtual COM ports. But, if you clean boot your CN3
you need to re-connect to devices.
You can also use Intermec Settings to turn on the radio and enable
Bluetooth settings. Use this table to understand the settings you see
in the Bluetooth menu in Intermec Settings.
Connecting to a Bluetooth Scanner
You can connect to an Intermec Bluetooth scanner, such as the SF51
or SR61, using one of these methods:
Scan the association bar code label that ships with the CN3
Run the Wireless Scanning Wizard
To connect to a Bluetooth scanner with the association label
1 Make sure that the Bluetooth radio on your CN3 is enabled and
that your CN3 is discoverable and connectable.
2 Make sure that your Bluetooth scanner is on.
3 When prompted, enter the passcode for your scanner. The default
passcode for Intermec Bluetooth scanners is 0000.
4 Tap Finish.
Bluetooth Settings
Setting Description
Power Set and view whether the Bluetooth radio is on or off.
Discoverable Allows other Bluetooth devices to be able to discover
the computer during a device discovery.
Connectable Allows other Bluetooth devices to connect to your
computer.
Class of
Device
Determines how the device appears to other devices
during discovery.
IBT Displays the Intermec Bluetooth Library version.
Radio Displays the Bluetooth Radio Hardware version.
Device
Address
Displays the Bluetooth address of your computer.
Page view 50
1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 141 142

Comments to this Manuals

No comments