Intermec PD41 User Manual download pdf (Page 54)

Chapter 5 — Setting up the Printer

44 EasyCoder PD41 Printer User’s Guide

The functions 7a-7e are described on the next page.

Extended Testmode: Activating

Step

Data/

Ready Error RtW Button Comment

1 1 Make sure the printhead is

lifted. Press and hold the

Print button and switch the

printer On. Extended

Testmode is activated after

10 seconds.

2 flash flash flash All 3 LEDs flash rapidly four

times. Extended Testmode is

activated. Release button to

continue.

Extended Testmode: Selecting Function

Step

Data/

Ready

Error RtW Button Comment

3 flash flash flash 0 LEDs flash fast four times,

in four-second intervals.

4 flash Lower the printhead.

5 1 Press the Print button and

hold.

6 Release the button when LED combination corresponding to

your choice of function flashes. Then see corresponding

function table below.

7a 0 0 1 Test Label function.

7b 0 1 0 Testfeed Mode Slow

function.

7c 0 1 1 Dump mode function.

7d 1 0 0 Factory default function.

7e111 Exit Extended Testmode.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 93 94

No comments

Intermec PD41 User Manual Page 54