Intermec TRACKER PRO 128 User Manual Page 10

  • Download
  • Add to my manuals
  • Print
  • Page
    / 32
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 9
8
al seconds until a continuous chirp is heard.
Light. LIGHT controls the units display backlight. With the unit powered
on, press LIGHT once to turn the backlight on high. Press LIGHT a sec-
ond time to turn the backlight on low, and a third time turns the back-
light off. The backlight is very effective for low-light and nighttime opera-
tion. When the backlight is on, the Tracker unit will consume more power
than with the backlight off. This is important when using the Tracker unit
in a portable configuration powered by a separate battery, or when pow-
ering the unit from a trolling motor battery.
When powering the unit from a battery such as in portable applications,
you can prolong the battery life by using the backlight at a minimum.
The three lower buttons, MENU, UP ARROW, and DOWN ARROW work
together to control the Tracker unit menu-controlled user functions.
Menu. MENU displays a menu on-screen
for adjustment. In normal operation,
pressing MENU repeatedly cycles through
all available menu headings. When a
menu heading displays, the full menu
appears after a short pause. A menu remains on-screen for several seconds,
and can be adjusted by using the ARROW keys. If no adjustment is made
in the allotted time, the menu disappears. If you want the menu to remain
on-screen longer press and hold MENUthe menu will remain on-screen
indefinitely. Once you release the menu button, the screen will time out.
Once a menu times out, it is still considered the active menu. Press MENU
to bring up the last menu used.
Arrow Keys. The UP ARROW and DOWN ARROW make adjustments to
menu functions. On the left side of every menu there are UP ARROW and
DOWN ARROW symbols. The symbols indicate which ARROW button has
a function in a particular situation. Either one or both ARROW buttons can
be used to adjust the menu function. A hollow ARROW symbol means the
corresponding ARROW button has no function. Pressing that button will
result in no adjustment and the error audible will be heard. A solid
ARROW symbol means the corresponding ARROW button can be used to
affect the menu adjustment.
USING THE TRACKER UNIT
CONTROL FUNCTIONS
Menu Heading
Page view 9
1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 31 32

Comments to this Manuals

No comments