Intermec CK3A User Manual download pdf (Page 29)

Chapter 1 — Using the Computer

CK3 Mobile Computer User’s Manual 17

The Intermec Ready-to-Work indicator (blue LED) is used by

Intermec’s SmartSystems Foundation, an application that lets you

manage all of your SmartSystems-enabled devices simultaneously

from a central location. For more information, see “Configuring the

CK3 Remotely With SmartSystems Foundation” on page 33, or

contact your Intermec representative. Custom applications may also

use the blue LED for other purposes.

Scanning Bar Codes

The CK3 ships with an internal imager to scan and enter bar code

data. You can also connect to:

• cordless scanners, such as the SF51 and SR61 through Bluetooth

communications. For help, see “Connecting to a Bluetooth

Scanner” on page 35.

• tethered scanners, such as the SR30 and SR61T through the

CK3 RS-232 adapter (Model AA21). For help, see the CK3 RS-232

Adapter (AA21) Instructions.

The type of imager you are using and the type of bar code you are

decoding determines the way you scan the bar code. Depending on

the imager model, the CK3 supports reading 1D linear bar codes, 2D

images, and composite and postal codes. You can identify the imager

model by looking at the label inside the battery compartment.

By default, these bar code symbologies are enabled on the CK3:

• Code 39

• Code 128/GS1-128

The blue LED usually turns off within 10 seconds, but it may stay

on for up to 30 seconds. During this time, do not press the Power

button or remove the battery, or you may corrupt the data on

your CK3.

Note: The CK3 with an EX25 near-far range area imager does not

support connections to the SR61T.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 135 136

No comments

Intermec CK3A User Manual Page 29