Intermec CK61 User Manual download pdf (Page 30)

Chapter 1 — Using the CK61 Mobile Computer

18 CK61 Mobile Computer User’s Manual With Windows Mobile

The Read-to-Work indicator (blue light) is for the SmartSystems

Foundation application that is part of a wireless network using all

Intermec devices. For more information, see “Configuring the CK61

Using SmartSystems Foundation” on page 24 or contact your

Intermec representative. Selected application software programs may

also use the blue light, either steady or flashing, for other purposes.

Scanning Bar Codes

Use the area imager to scan and enter bar code data. The CK61

supports reading 1D and 2D images, composite and postal codes. If a

bar code is not enabled, you need to go to Intermec Settings to enable

or disable symbologies. For help, see “Configuring the CK61 With

Intermec Settings” on page 23.

Scanning With the Area Imager

The CK61 has an area imager that can scan 1D and 2D bar code

symbologies, composite, and postal codes. It also supports

omnidirectional (360°) scanning where you can position the CK61 in

any orientation to scan a bar code label. Using the 2D imager is like

taking a picture with a digital camera.

To use the area imager

1 Press the Power button to turn on the CK61, point the scanner

window a few inches from the bar code label, and hold steady.

2 Press the Scan button and center the red aiming beam over the bar

code label. The aiming beam is smaller when the imager is closer

to the bar code and larger when it is further away.

When a bar code label is successfully read, a high beep is emitted and

the Good Read LED lights briefly. Release the Scan button.

Do not look directly into the window area or at a reflection of the

laser beam while the laser is scanning. Long-term exposure to the

laser beam can damage your vision.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 127 128

No comments

Intermec CK61 User Manual Page 30