Intermec EASYCODER PD4 User Manual download pdf (Page 87)

Intermec EasyCoder PD4—User’s Guide 77

Appendix B—Media Speciﬁcations

Self-Adhesive Labels

⇐ a ⇒ Media Width (including liner)

Maximum: 118.0 mm (4.65 inches)

Minimum: 25.0 mm (1.00 inches)

⇐ b ⇒ Liner

e backing paper must not extend more than a total of 1.6 mm (0.06

inches) outside the labels and should protrude equally on both side.

⇐ c ⇒ Label Width (excluding liner)

Maximum: 116.4 mm (4.58 inches)

Minimum: 23.8 mm (0.94 inches)

⇐ d ⇒ Label Length

Maximum:

8 dots/mm (203.2 dpi) 1270 mm (50 inches)

11.81 dots/mm (300 dpi) 558.8 mm (22 inches)

Minimum:

8 dots/mm (203.2 dpi) 5 mm (0.2) inches)

11.81 dots/mm (300 dpi) 5 mm (0.2 inches)

⇐ e ⇒ Label Gap

Maximum: 26.0 mm (1.02 inches)

Recommended: 3.0 mm (0.12 inches)

Minimum: 1.2 mm (0.05 inches)

e Label gap sensor must be able to detect the extreme front edges of

the labels. It can be moved 0 to 57 mm (0 to 2.24 inches) from the inner

edge of the media (see Chapter 9).

Paper Type Setup

• Gap paper

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 99 100

No comments

Intermec EASYCODER PD4 User Manual Page 87