Intermec Cv60, WiFi, Bluetooth, Rugged, Windows CE 128MB Pcmcia Internal Antena TE2000 User Manual download pdf (Page 79)

Chapter 5 — Upgrading, Troubleshooting, and Cleaning the CV60

68 CV60 Vehicle Mount Computer With Windows CE User’s Manual

7 Attach the IDE cable to the hard drive and secure the hard

drive to the hard drive bracket with the four screws that were

removed in Step 5.

8 Attach the IDE cable to the CV60 and attach the cable cover

that you removed in Step 4.

9 Close the CV60.

Increasing Memory

The CV60 comes with 256 MB of SDRAM which is expandable

to 512 MB.

To install memory into the CV60

1 Using a Phillips screwdriver, remove the ten screws that secure

the rear cover to the CV60. This will expose the memory slot.

2 Take your new memory module and insert it into the memory

slot.

3 Push down on the memory module until the two metal

contacts clamp onto the memory module.

4 Attach the rear coverwith the ten screws that you had

removed in Step 1.

Memory slot

Note: The SODIMM slot (Single Outline Dual Inline Memory

Module) allows upgrading the base memory from 256 MB to 512

MB with an Intermec approved SDRAM card.

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 99 100

No comments

Intermec Cv60, WiFi, Bluetooth, Rugged, Windows CE 128MB Pcmcia Internal Antena TE2000 User Manual Page 79