Intermec CN3 User Manual download pdf (Page 175)

Chapter 5 — Network Support

CN3 Mobile Computer User’s Manual 161

Using Static WEP Security

The CN3 uses the Wired Equivalent Privacy (WEP) protocol to add

security to your wireless network based on the 802.11b/g standard. To use

WEP security, you need an access point with an 802.11b/g radio.

Configuring Static WEP Security With Funk Security

Use this procedure to set Static WEP security with Funk security.

1 Make sure you have configured the communications and radio

parameters on your CN3 and that Funk is your security choice.

2 Open Intermec Settings. Tap (+) to expand Communications > 802.11

Radio > Funk Security > Profile X with “X” being “1” through “4.”.

3 For Association, select “Open” and press Enter.

4 For Encryption, select “WEP” and press Enter.

5 For 8021x, select “None” and press Enter.

7 For Transmit key, select which WEP key to use for encryption of

transmitted data.

8 Define a value for each key, up to four. Enter an ASCII key or a hex key

either 5 or 13 bytes long based on the radio capability. Set a 5-byte value

for 64-bit WEP or a 13-byte value for 128-bit WEP. Precede hex keys

with 0x and make sure the keys use 5 or 13 hex pairs.

Using the Profile Wizard

A profile contains all the information necessary to authenticate you to the

network, such as login name, password or certificate, and protocols by

which you are authenticated.

You can have up to four profiles for different networks. For example, you

may have different login names or passwords on different networks, or you

may use a password on one network, and a certificate on another.

To start 802.11b/g communications on the CN3, tap Start > Settings > the

System tab > the Wireless Network icon to access the Profile Wizard for

the 802.11b/g radio module.

1 2 ... 170 171 172 173 174 175 176 177 178 179 180 ... 211 212

No comments

Intermec CN3 User Manual Page 175