Intermec CK32IS User Manual download pdf (Page 81)

Chapter 3 — Configuring the CK32 I-Safe

CK32 I-Safe Handheld Computer User’s Manual 65

6 Select one profile as the active profile by tapping Active

Profile and choosing a profile fro the drop-down list.

7 Save your settings.

Configuring WPA Security With Funk Security

Use these procedures to set WPA-802.1x, WPA2-802.1x, WPA-

PSK, or WPA2-PSK security on your CK32 I-Safe with Funk

security.

To configure WPA-802.1x with Funk security

1 Open Intermec Settings.

2 Make sure you have configured the communications and

radio parameters on your CK32 I-Safe.

3 Make sure you have selected Funk as your security choice.

4 Open Intermec Settings.

5 Choose Communications > 802.11 Radio > Funk Security

> Profile.

6 For Association, choose WPA or WPA2 and press Enter.

Encryption automatically defaults to TKIP if you are using

WPA. Encryption automatically defaults to WEP if you are

using Shared.

7 For 8021x, choose TTLS, PEAP, EAP-FAST, or TLS and

press Enter.

If you choose TTLS or PEAP:

a For Prompt for Credentials, choose Enter credentials

now.

b Select User name and type your user name.

c Select User Password and type a user password.

d For Validate Server Certificate, choose Yes.

Note: You can use Prompt for credentials to

troubleshoot your connection to the network if you have

problems. By choosing Enter credentials now, you are

storing the user name and password on the device so that

you will not need to enter it every time.

1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 148 149

No comments

Intermec CK32IS User Manual Page 81