Intermec CK32IS User Manual download pdf (Page 84)

Chapter 3 — Configuring the CK32 I-Safe

68 CK32 I-Safe Handheld Computer User’s Manual

3 From Intermec Settings, choose Communications > 802.11

Radio > Funk Security > Profile.

4 For 8021x, choose LEAP.

5 For Association, choose Open, WPA, WPA2, or Network

EAP. Encryption automatically defaults to TKIP if you

choose WPA, to AES if you choose WPA2, and to WEP if

you choose Open or Network EAP.

6 For Prompt for Credentials, select Enter credentials now.

7 Select User name and type your user name.

8 Select User Password and type your user password.

9 Save your settings.

Configuring Static WEP Security With Funk Security

1 Open Intermec Settings.

2 Make sure you have configured the communications

parameters and selected Funk as your security choice.

3 Choose Communications > 802.11 Radio > Funk Security

> Profile.

4 For Association, choose Open.

5 For Encryption, choose WEP.

6 For 8021x, choose None.

7 Define a value for the keys you want to use. You can define up

to four keys (Key 1

through Key 4).

Enter an ASCII key or a hex key that is either 5 bytes or 13

bytes long depending on the capability of the radio. Set a 5-

byte value for 64-bit WEP or a 13-byte value for 128-bit

WEP. Hex keys must be preceded by 0x and contain 5 or 13

hex pairs.

8 For Tran smit key, choose the key you want to use for

transmitting data.

9 Save your settings.

1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 148 149

No comments

Intermec CK32IS User Manual Page 84