Intermec CK32IS User Manual download pdf (Page 83)

Chapter 3 — Configuring the CK32 I-Safe

CK32 I-Safe Handheld Computer User’s Manual 67

2 Make sure you have configured the communications and

radio parameters on your CK32 I-Safe.

3 Make sure you have selected Funk as your security choice.

4 Choose Communications > 802.11 Radio > Funk Security

> Profile.

5 For Association, choose Open.

6 For Encryption, choose WEP.

7 For Inner Authentication, choose TTLS, PEAP or TLS.

If you choose TTLS or PEAP:

a Select User name and type your user name.

b Select Password prompt, and choose Enter password

now.

c Select User Password and type a user password.

d For Validate Server Certificate, choose Enabled.

If you choose TLS:

a Load a user and root certificate on your CK32 I-Safe. For

help, see “Loading a Certificate” on page 80.

b For Validate Server Certificate, choose Yes.

c You must enter a User Name and Subject Name. You can

also enter a Server Common Name if you want to

increase your level of security.

8 Save your settings.

Configuring LEAP Security on the CK32 I-Safe

1 Open Intermec Settings.

1 Make sure you have selected Funk as your security choice.

2 Make sure you have configured the communications

parameters and selected Funk as your security choice.

Note: You can use Prompt for password to troubleshoot your

connection to the network if you have problems.

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 148 149

No comments

Intermec CK32IS User Manual Page 83