Intermec CK32IS User Manual download pdf (Page 95)

Chapter 3 — Configuring the CK32 I-Safe

CK32 I-Safe Handheld Computer User’s Manual 79

Networks already configured are preferred networks. You can

connect to only preferred networks or search for and connect to

any available network.

You can add a wireless network when the network is detected or

manually by entering settings information. To determine if

authentication information is needed, see your network

administrator.

When the CK32 I-Safe restarts with Microsoft selected as the

security choice, a dialog box with your wireless network

information appears. You can connect to an existing preferred

connection or set up a new connection. The following

information is for setting up a new connection.

To configure Microsoft security for a new connection

1 In the radio network connection dialog box, double-tap Add

New.

2 Enter a network name. If the network was detected, the

network name is entered and cannot be changed.

3 (Optional) To connect to an ad-hoc connection, select This is

a computer-to-computer (ad-hoc) network; wireless access

points are not used.

4 Follow these steps to disable authentication:

a Set Authentication to Open if WEP keys are not required

or to Shared when WEP keys are required for association.

b Set Data Encryption to Disabled.

Follow these steps to enable WEP encryption:

a Set Authentication to Open if WEP keys are not required

or to Shared when WEP keys are required for association.

b Set Data Encryption to WEP.

c To change the network key, clear The key is provided

automatically check box, enter the new Network key,

and then select the appropriate Key index.

Follow these steps to enable WPA authentication:

a Set Authentication to WPA.

b Set Data Encryption to either WEP or TKIP.

1 2 ... 90 91 92 93 94 95 96 97 98 99 100 ... 148 149

No comments

Intermec CK32IS User Manual Page 95