Intermec CK32IS User Manual download pdf (Page 22)

Chapter 1 — Using the CK32 I-Safe Handheld Computer

6 CK32 I-Safe Handheld Computer User’s Manual

Maximizing Battery Life

There are several things that you can do to extend the life of your

fully charged battery.

• Verify that Radio Power Management is enabled (Fast PSP).

Enabling radio power management allows your radio to

switch between awake and sleep modes based on network

traffic. If you use the default setting of disabled (CAM), you

will have the best network performance (data throughput) but

it will draw the most power from your battery.

• Verify that the backlight timeout is set to 15 seconds.

• Verify that each setting under Power Management (Device

timeout, Screen timeout) has a value of 1 minute.

You can use Intermec Settings to easily make all of these

configuration changes.

Checking the Battery Status

You can check the battery status by looking at the Battery icon on

the front of the CK32 I-Safe or by checking the Power Settings.

Tap the Battery icon on the Status bar or use the following

procedure to check the Power Settings on your CK32 I-Safe.

Either method will take you to the Settings display which

indicates the percent of battery charge remaining.

To check the Power Settings

1 Tap Start. The Start menu appears.

2 Tap Settings > System.

3 Tap the Power icon. The Power Settings display appears.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 148 149

No comments

Intermec CK32IS User Manual Page 22