Intermec SR31T HP User's Guide download pdf (Page 33)

Chapter 3 — SR31T Interfaces

SR31T Tethered Scanner User’s Guide 25

USB Virtual COM Port Driver

For a first time setup when using the USB Virtual COM cable mode

you will need to install the USB Virtual COM Port (VCP) driver. There

are two ways to do this:

• Method 1: Use the Virtual COM driver installation function in

EasySet (this is the easiest way to install the driver).

• Method 2: Download and install the USB Virtual COM driver

installation package from the Intermec web site

Method 1: Use EasySet to install the USB virtual COM port driver

1 If it is not already installed on your host PC, download and install

the latest version of EasySet (we recommend that you install it in

the default location proposed by the installer).

2 Start EasySet and select Options > Virtual COM driver

installation.

If the VCP Installer window proposes options to Repair or

Remove the VCP Installer, the driver is already installed - click

Cancel to exit the installation procedure.

If the VCP Installer window offers to guide you through the

installation, click Next and Install each time as requested to

complete the VCP driver installation.

Method 2: Download and install the USB virtual COM port driver from

the Intermec web site

1 Go to the Intermec Knowledge Central page.

2 In the search box type “SR31T USB driver” and click Search.

3 Download the driver installation package (choose the package

that is compatible with your PC operating system if applicable).

4 Follow the installation procedure provided with the driver

package on the Knowledge Central web page.

Note: If you want to test your USB Virtual COM Port Driver

installation after you have installed the driver and set your scanner to

USB Virtual COM mode, you can use EasySet or a serial console

application such as HyperTerminal to open the Intermec Virtual Com

Port and scan bar codes.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 71 72

No comments

Intermec SR31T HP User's Guide Page 33