Intermec SR31T HP User's Guide download pdf (Page 45)

Chapter 4 — Configuring the SR31T Scanner

SR31T Tethered Scanner User’s Guide 37

Configuring Your Scanner with EasySet

You can use EasySet, the Intermec scanner setup software, to set up

your product in two ways:

• Online setup—send configuration commands from EasySet

directly to the product.

• Offline setup—send configuration commands to a bar code setup

sheet, print out the setup sheet and use your scanner to scan the

configuration bar codes.

If it is not already installed on your host PC, download and install the

latest version of EasySet at this link on the Intermec web site:

www.intermec.com/EasySet

We recommend that you install EasySet in the default location

proposed by the installer.

Online Setup with EasySet

Online setup with EasySet is only available if you are using a USB

cable or an RS-232 cable.

To configure your scanner online by sending commands from EasySet

1 Connect the scanner to a host PC using a USB cable or an RS-232

cable and set up the connection parameters if necessary (see

Chapter 3, "SR31T Interfaces” on page 19).

2 Start EasySet. The first time you start EasySet, the Select product

dialog box appears.

If the Select product dialog box does not appear, choose Product

> Select or click on the product icon in the upper left corner.

3 Select your product (SR31T).

4 Select Communication > Select Communication Interface. The

Device Selection dialog box appears.

5 Select the communication interface that you are using for your

system and click OK.

6 EasySet connects to your scanner and retrieves the current

configuration. These configurations are indicated with a blue

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 71 72

No comments

Intermec SR31T HP User's Guide Page 45