Intermec PD41 User Manual download pdf (Page 109)

Appendix A — Specifications

PD41 and PD42 Commercial Printer User’s Manual 95

USB Interface

The printer supports USB full speed v2.0 Host. To use the USB

interface to print from a PC, you need to have the Intermec

InterDriver printer driver installed on your PC. For help setting up

USB communications, see “Connecting the Printer to a PC

Through the USB Device Port” on page 22.

The printer is a “self-powered device.” Intermec recommends that you

only connect one printer to each USB port on the PC, either directly

or through a hub. You can connect other devices, such as a keyboard

or a mouse, to the same hub. If you need more than one USG printer

to a host, you should use different USB ports.

The USB cable that ships with the printer has a USB Type A connector

on one end to connect to the PC and a USB Type B connector on the

other end to connect to the printer. You do not need to configure

communications for the USB port.

USB Type A Connector

USB Type B Connector

7 CTS Clear to send

8RTS Request to send

Serial Cable Pins and Description (continued)

Pin Signal Description

1 2 ... 104 105 106 107 108 109 110 111 112 113 114 ... 161 162

No comments

Intermec PD41 User Manual Page 109