Intermec PD41 User Manual download pdf (Page 59)

Chapter 3 — Configuring the Printer

PD41 and PD42 Commercial Printer User’s Manual 45

Use the following table to understand the Web Shell settings.

Configuring Alerts

Use the Alerts page to view and change the printer alert settings.

To configure alerts

1 Click Printer > Alerts.

2 Change the alert settings:

• Choose Enabled or Disabled from the Setting list.

• Specify a Delay repeat in the text field.

• Select seconds or occurrences in the Delay Unit list.

• Enter a message in the Message text field.

3 Select the Notification method.

Understanding the Web Shell Settings

Setting Description

Testfeed [value] Calibrates the label stop sensor performs a

testfeed. Selecting this setting is equivalent to

issuing the TESTFEED command on the

printer.

Ribbon Sensor Detects is the printer has run out of ribbon

during printing.

Default Setup Returns the printer to factory default settings.

Passwords, alerts, and the selected application

are not changed.

Reboot Reboots the printer.

Print Test Label Prints the predefined test label you choose.

Command Language Sets the command language to Fingerprint,

Direct Protocol, IPL, ESim, ZSim, or DSim. You

need to reboot the printer for the change to take

effect.

Fingerprint Application Defines the application to run as the default on

startup. You need to reboot the printer for the

change to take effect.

Standard I/O Defines the port the printer listens to. You need

to reboot the printer for the change to take

effect.

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 161 162

No comments

Intermec PD41 User Manual Page 59