Intermec PD41 User Manual download pdf (Page 117)

Appendix A — Specifications

PD41 and PD42 Commercial Printer User’s Manual 103

Tickets With Gaps (Gap Stock)

* The print length is limited by memory constraints

LSS Detection Position (c)

Variable from 0 to 57 mm (0 to 2.24 in).

Detection Slit Length (d)

The length of the detection slit (excluding corner radii) must be a

minimum of 2.5 mm (0.10 in) on either side of the LSS detection

position (c).

Media Width (a)

Measurement Value

Maximum 114.3 mm (4.50 in)

Minimum 25.0 mm (1.00 in)

Copy Length (b)

Measurement Fingerprint IPL ESim

8 dots/mm (203 dpi)

Maximum 1270 mm (50 in)* 600 mm (23 in) 600 mm (23 in)

Minimum 6.0 mm (0.2 in) 6.0 mm (0.2 in) 6.0 mm (0.2 in)

11.81 dots/mm (300 dpi)

Maximum 558.8 mm (22 in)* 406.4 mm (16 in) 406.4 mm (16 in)

Minimum 6.0 mm (0.2 in) 6.0 mm (0.2 in) 6.0 mm (0.2 in)

Detection Slit Height (e)

Measurement Value

Maximum 26.0 mm (1.02 in)

Recommended 3.0 mm (0.12 in)

Minimum 1.2 mm (0.05 in)

1 2 ... 112 113 114 115 116 117 118 119 120 121 122 ... 161 162

No comments

Intermec PD41 User Manual Page 117